Wastewater Treatment System
for Residential and Commercial Properties
Multi-Flo is a convenient alternative to a central sewage system or the septic tank and is ideal for the renovation of a failing on-site sewage system. And thanks to its durable, lightweight construction, Multi-Flo can be installed quickly and easily in any location, even those with limiting factors
Clean, Odorless Effluent
A unique feature of the Multi-Flo System is that the entire process takes place in a single tank. Multi-Flo has been Tested and Certified under ANSI/NSF Standard 40 as a Class I System - the Highest Rating. Because of the high degree of treatment, the Multi-Flo effluent is allowed for surface discharge as well as recycle and irrigation use.
Founded in 1970, Multi-Flo has set the standard in wastewater treatment. From the day of its inception, Multi-Flo was developed with the highest effeciency - consequently we have never had to change to meet standards required by NSF International (NSF). Initially tested by NSF in 1973, and again in 1981, and most recently in 1991, we have always maintained those high standards to guarentee a Class I rating.
Multi-Flo has sold thousands of units across the country. This success is due not only to the outstanding product, but also to people involved with Multi-Flo. We take pride in our product and stand behind it.
Features and Benefits:
No Odors
Because the Multi-Flo utilizes an "aerobic" treatment process, there are no offensive "rotten egg" odors commonly associated with septic tanks.
Quiet Operation
The specially designed, totally submerged aerator is almost 100% noise-free. This eliminates the annoying noise created by top-mounted aerators and auxillary compressors which must be located in or near the home.
Low Operating Cost
This newly redesigned aerator costs only a few cents a day to operate. This is less than the cost to operate most common houshold appliances.
No Owner Maintenance
Although periodic, routine maintenance is necessary to insure continuous, trouble-free operation, all service is provided by local factory-trained representatives. The Multi-Flo alarm system alerts the homeowner of any pending problem.
Low Installation Cost
The lightweight, single tank design allows for simple installation without the need for heavy, expensive equipment. The durable fiberglass tank can be transported in a pick-up truck.
Minimal Space Requirements
The Multi-Flo requires only a small space (approximately 6' in diameter) for installation. In addition, depneding on local and state regulations, it may be permissable to reduce normal drainfield sizing requirements or to discharge the effluent (with disinfection) directly to an approved receiving stream. CHECK WITH YOUR STATE, COUNTY, OR LOCAL REGULATORY OFFICIAL TO DETERMINE IF SUCH REDUCTIONS ARE PERMITTED.
Easy Access for Service
The low-profile lid allows immediate accessibility to all of the Multi-Flo components. All necessary inspection and maintenance can be done quickly and easily without digging up the yard. Tamperproof fasteners prevent unauthorized entry into the unit.
Two (2) Year Warranty
Multi-Flo warrants each treatment plant to be free of defects and workmanship for a period of two years from the date of installation.
Prevents Drainage Failure
The highly-treated, filtered effluent produced by the Multi-Flo is over 95% free of the normal sewage contaminants that cause the "progressive failure" of conventional systems.
Several Plant Sizes Available
Multi-Flo provides five (5) individual treatment plant capacities: 500, 600, 750, 1000, and 1500 gallons per day (GPD). This allows for proper sizing of the plant based upon actual (or anticipated) sewage flows.
NSF Tested and Certified Class I System
Mutli-Flo has achieved the highest performance rating from the NSF. Based upon their testing results, the Multi-Flo is one of the most efficient treatment plants in the market.
Photograph Circa 1980's
